LMR600 Times — SO239 UHF Female to SO239 UHF Female
Custom low loss LMR600 Times RF coaxial cable assembly with SO239 UHF Female and SO239 UHF Female connectors.
Cable
LMR600 Times
End A
SO239 UHF Female
End B
SO239 UHF Female
Specs Summary
Made in USA
Assembled and tested in-house
Free Shipping
Fast, reliable delivery
Tested & Verified
Every cable tested before shipping
Easy Returns
30-day hassle-free returns
Need help choosing a cable?
Our RF experts are here to help you get the right fit.
Call an RF expert
1-661-200-0771
Email us
sales@wifiexpert.us
Need a custom cable?
Build your exact cable in seconds using our Cable Builder.
About This Assembly
Specs Summary
LMR600 Times Cable
LMR-600 is a Times Microwave ultra-low-loss 50-ohm coaxial cable with a 0.600" outer diameter, designed for demanding long-run installations where signal loss must be minimized. Supporting frequencies up to 5.8 GHz, it is the first choice for tower-to-radio runs exceeding 100 feet, distributed antenna systems (DAS), and high-power broadcast feedlines.
UHF Connector
The UHF connector (also known as PL-259 male / SO-239 female) is a large, low-cost RF connector designed in the 1930s for HF and VHF frequencies. Despite its name, its practical usable range is below 300 MHz due to its non-constant impedance design. It remains extremely popular in amateur radio (HF through VHF), CB radio, and marine radio applications.
Common Applications
This UHF cable assembly is well suited for tower-to-radio feedlines, distributed antenna systems (DAS), and high-power broadcast runs. The combination of reliable UHF connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
LMR600 Times Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 1 dB | 0.01 dB |
| 450 MHz | 2.1 dB | 0.021 dB |
| 900 MHz | 3 dB | 0.03 dB |
| 1.8 GHz | 4.4 dB | 0.044 dB |
| 2.4 GHz | 5.1 dB | 0.051 dB |
| 5.8 GHz | 8.4 dB | 0.084 dB |
Frequently Asked Questions
What is LMR600 Times coaxial cable used for?
LMR-600 is a Times Microwave ultra-low-loss 50-ohm coaxial cable with a 0.600" outer diameter, designed for demanding long-run installations where signal loss must be minimized. Supporting frequencies up to 5.8 GHz, it is the first choice for tower-to-radio runs exceeding 100 feet, distributed antenna systems (DAS), and high-power broadcast feedlines.
What is the signal loss of LMR600 Times?
At 1800 MHz, LMR600 Times has approximately 4.4 dB of loss per 100 ft (0.044 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 300 MHz, limited by the lowest-rated component across the cable and connectors.
