Cable
RFC195
RFC195 Coaxial Cable
Custom RFC195 cable assemblies. Choose from 52 compatible connectors and any length from 1 to 100 feet.
Specifications
Diameter
.195 INCH
Impedance
50 Ohm
Frequency
DC – 6 GHz
Vel. Factor
83%
Max Voltage
600 VRMS
Shield
Aluminum foil + tinned copper braid
Jacket
PVC
Bend Radius
1.0 in (25mm)
Weight
1.8 lb/100ft
Temp Range
-40°C to +85°C
About RFC195
RFC-195 is a budget-friendly 50-ohm coaxial cable with a 0.195" outer diameter that provides good performance for short-to-medium runs at a lower price than LMR-195. Suitable for antenna jumpers, two-way radio leads, and WiFi access point connections up to 30 feet where cost efficiency is the primary consideration.
Attenuation (dB per 100 ft)
100 MHz
3.3 dB
450 MHz
7.2 dB
900 MHz
10.4 dB
1.8 GHz
15.1 dB
2.4 GHz
17.7 dB
5.8 GHz
29.4 dB
Select End A Connector (52 available)
Choose the connector for the first end of your cable.
Select End B Connector
Choose the connector for the second end.
Common Applications
Frequently Asked Questions
What connectors are compatible with RFC195?
RFC195 is compatible with 52 connector types including SMA MALE, SMA FEMALE, RP-SMA MALE, RP-SMA FEMALE, SMA MALE ANGLE, and more. All connectors can be paired in any combination.
What is the impedance of RFC195?
50 Ohm — standard for RF systems, test equipment, and antenna feedlines.
What frequency range does RFC195 support?
RFC195 supports frequencies from DC to DC – 6 GHz.
How are RFC195 cables assembled?
Every RFC195 cable assembly is hand-terminated and continuity tested at our US facility before shipping. We do not drop-ship pre-made cables — each one is built to your specifications.
What lengths are available for RFC195?
RFC195 is available from 1 ft up to 100 ft. Use the cable builder for any custom length.