RFC195 — RP-TNC MALE to RP-TNC MALE
RP-TNC WiFi extension cable for Cisco and enterprise access point antenna runs from 10 to 75 ft.
Cable
RFC195
End A
RP-TNC MALE
End B
RP-TNC MALE
Used For
RP-TNC WiFi Jumper Cable — RFC195
Used for Cisco and enterprise WiFi RP-TNC antenna extensions where the access point antenna needs to be relocated to improve coverage. RFC195 delivers ~6.5 dB/100ft at 1 GHz — a practical cable for RP-TNC WiFi runs from 10 to 75 ft where maintaining signal quality improves access point coverage.
Specs Summary
Made in USA
Assembled and tested in-house
Free Shipping
Fast, reliable delivery
Tested & Verified
Every cable tested before shipping
Easy Returns
30-day hassle-free returns
Still need help? Talk to an expert.
Our RF team is happy to point you in the right direction.
Call an RF expert
1-661-200-0771
Email us
sales@wifiexpert.us
Need a custom cable?
Build your exact cable in seconds using our Cable Builder.
About This Assembly
Specs Summary
RFC195 Cable
RFC-195 is a budget-friendly 50-ohm coaxial cable with a 0.195" outer diameter that provides good performance for short-to-medium runs at a lower price than LMR-195. Suitable for antenna jumpers, two-way radio leads, and WiFi access point connections up to 30 feet where cost efficiency is the primary consideration.
RP-TNC Connector
RP-TNC (Reverse Polarity TNC) uses the TNC threaded shell with reversed pin conventions, similar to RP-SMA. It is used on some commercial WiFi access points and outdoor CPE antennas, particularly in older Cisco and Linksys equipment, and offers better vibration resistance than RP-SMA in demanding outdoor environments.
Common Applications
This RP-TNC cable assembly is well suited for short-to-medium antenna jumpers and budget wireless installations. The combination of reliable RP-TNC connectors and custom-cut cable length makes it a practical choice for both field installations and bench setups. Every assembly is hand-terminated, continuity tested, and ships free within the USA.
RFC195 Signal Loss
Approximate attenuation at common RF frequencies.
| Frequency | Loss / 100 ft | Loss / ft |
|---|---|---|
| 100 MHz | 3.3 dB | 0.033 dB |
| 450 MHz | 7.2 dB | 0.072 dB |
| 900 MHz | 10.4 dB | 0.104 dB |
| 1.8 GHz | 15.1 dB | 0.151 dB |
| 2.4 GHz | 17.7 dB | 0.177 dB |
| 5.8 GHz | 29.4 dB | 0.294 dB |
Frequently Asked Questions
What is RFC195 coaxial cable used for?
RFC-195 is a budget-friendly 50-ohm coaxial cable with a 0.195" outer diameter that provides good performance for short-to-medium runs at a lower price than LMR-195. Suitable for antenna jumpers, two-way radio leads, and WiFi access point connections up to 30 feet where cost efficiency is the primary consideration.
What is the signal loss of RFC195?
At 1800 MHz, RFC195 has approximately 15.1 dB of loss per 100 ft (0.151 dB/ft).
What frequency range does this assembly support?
This assembly is rated DC – 6 GHz, limited by the lowest-rated component across the cable and connectors.
